Bezel Inserts for SKX007, SKX013, SRP Turtle & Seiko 5 GMT

    Filter
      165 products

      A bezel insert is the disc set into a rotating bezel that carries its scale: the 60-minute dive track, a 12-hour dual time scale or a 24-hour GMT scale. Every insert here is sized for one watch: SKX007 and SRPD, SKX013, SRP Turtle Re-issue or SNZF17. The SKX007 inserts also suit the Seiko 5 GMT, on our SSK rotating bezels.

      Insert Sizes: SKX007, SKX013 and SRP Turtle

      The outer diameter is what separates one watch's inserts from another's, so it's the first number to check.

      • SKX007 and SRPD: 38mm across on the ceramic, glass and aluminum inserts, and 37.8mm on the stainless steel ones.
      • SKX013: 33.6mm across on most, 33.7mm on a few.
      • SRP Turtle Re-issue: 39mm across on most, 39.1mm on a few.
      • SNZF17 Sea Urchin: a sloping ceramic Sub-style insert.

      SSK Bezel Inserts for the Seiko 5 GMT

      We don't list a separate SSK insert, because our SSK rotating bezels take the SKX007 and SRPD inserts: every SSK bezel page says it enables the use of all our SKX007/SRPD bezel inserts. For a GMT look, our flat ceramic GMT inserts are written for NH34 GMT conversions and other Seiko 5 GMT (SSK) style builds.

      Choose a Material

      • Ceramic: a scratch-resistant face, because ceramic is much harder than the steel around it, with its color fired into the material so sunlight won't fade it. Flat or slope.
      • Lumed glass: a flat glass face whose scale is printed in lume. Fitting it is final: removing it damages the print, and a glass insert damaged after installation isn't refunded or replaced.
      • Aluminum: each states that it fits under the original SKX007 Hardlex or SRP Turtle Re-issue crystal.
      • Stainless steel: a steel face, brushed on most, and on many the markings are cut into the metal rather than printed.

      Dive, Dual Time or GMT Scale

      The scale decides what the rotating bezel can track, and only one of them needs a special movement.

      • Dive scale: line the rotating bezel's triangle up with the minute hand when you start, and the hand's place on the 60-minute track shows how long has passed. Sub, SKX, Vintage Sub and PO styles all use it.
      • Dual time: 12 hours around the rotating bezel. Offset it by the time difference and the ordinary hour hand reads a second zone off it, with no extra movement needed.
      • GMT: 24 hours around the rotating bezel. It takes a GMT hand to read it, so save it for a build on the NH34 movement or an SSK.

      Inserts by Watch and Material

      Before You Order

      Before an insert goes on your Seiko mod, check its inner and outer measurements against your rotating bezel, then its profile against your crystal: a flat or slope profile decides which crystal sits flush, and most of our SKX007 and SRPD crystals say on their page which profile they're for. A glass insert is final once it's installed.

      Frequently Asked Questions

      Will an SKX007 bezel insert fit an SKX013 or SRP Turtle?

      No, the outer diameters differ: 37.8–38mm for our SKX007 and SRPD inserts, 33.6–33.7mm for the SKX013 and 39–39.1mm for the SRP Turtle Re-issue. Each watch needs the inserts sized for it.

      Is there a bezel insert for the Seiko SSK?

      Yes, once one of our SSK rotating bezels is fitted: those bezels take all our SKX007 and SRPD bezel inserts. Our flat ceramic GMT inserts are made for NH34 GMT conversions and Seiko 5 GMT (SSK) style builds.

      Does a dual time insert need a GMT movement?

      No. A dual time insert is a 12-hour scale, read by the normal hour hand on any movement. A 24-hour GMT insert is the one that needs a GMT hand, such as on an NH34 build.

      What does a dive bezel insert do?

      It tracks elapsed time. Set the rotating bezel's triangle against the minute hand when you start, and the minute hand's place on the 60-minute track shows how long it has been.

      Which bezel insert material should I choose?

      Ceramic for scratch resistance and color that doesn't fade, lumed glass for a scale that glows, aluminum for an insert that states its fit under the original SKX007 or SRP Turtle Re-issue crystal, and stainless steel for a metal face with cut markings on many.