Watch Chapter Rings for Seiko Mods

    Filter
      116 products

      Chapter rings sit at the edge of the dial and carry the scale your hands are read against, so a new one changes how a watch reads while the dial stays. Each ring here is made for a specific watch: the SKX007 and SRPD, the Seiko 5 GMT SSK, the SKX013, the SRPE, the SRP Turtle Re-issue or the SNZF17.

      What a Chapter Ring Does on a Watch

      Watch references describe the chapter ring as the outermost ring of the dial, the one that carries its scales, markings or minute divisions. On our rings that scale is a minute track, a 24-hour track, or numerals from 05 to 60. A micro marker ring adds color at the hours, a GMT ring adds a 24-hour scale, and a lumed ring keeps the minute track readable after dark.

      Chapter Ring Sizes by Watch

      • SKX007 & SRPD: 30.5mm outside and 27.7mm inside on every ring apart from the angled ones. Most also list the SKX009 and SKX011.
      • SKX013: 28.4mm outside, standard at 24.4mm inside or slim at 26.2mm inside.
      • SRPE: 32.7mm outside and 27.5mm inside.
      • Seiko 5 GMT (SSK): rings named for the SSK001, SSK003 and SSK005, in colors, polished or brushed, or engraved.
      • SRP Turtle Re-issue: brushed silver, or black with a marker.
      • SNZF17 Sea Urchin: brushed or polished silver.

      Ring Styles and What Each Marking Is For

      • Micro marker: a fine minute track with the hour markers in one color, such as red, green, orange, yellow or blue, on the SKX007 and SRPD rings.
      • 05-60: large five-minute numerals from 05 to 60, offered in orange, matte yellow, dark blue, black and silver.
      • GMT: a 24-hour scale. The SKX007 and SRPD GMT rings come printed in two-tone colors or engraved in steel, and the SRPE GMT rings carry GMT markers in two-tone colors.
      • Laser etched and engraved: markers cut into the ring, in polished, brushed or sandblasted finishes on the SKX007 rings, and laser engraved on the SRPE rings.
      • Lumed: black or silver SKX007 and SRPD rings with C3 or BGW9 lume, an engraved SKX007 GMT ring with C3 lume, and an engraved SSK ring with C3 lume.
      • Angled: SKX007 and SRPD rings in black, black/red, white and blue.

      GMT Chapter Rings and the NH34

      A 24-hour scale is read by a GMT hand, so a GMT chapter ring belongs on a GMT build, such as one on the Seiko (TMI) NH34A movement. The SSK rings are a different case: they're named for the Seiko 5 GMT watch itself, the SSK001, SSK003 and SSK005, and most come in plain colors and finishes rather than with a 24-hour scale.

      Fitting a Chapter Ring

      Check how the ring is held before you start: some SKX007 and SRPD rings have a leg on the back that locates them in the case, while others may need adhesive. A few dials name the ring to use with them, so read the dial page too. Pair your ring with a dial and a sapphire crystal made for the same watch.

      Before You Order

      For any Seiko mod, choose the ring made for your watch first, then the style. Each SKX007, SKX013 and SRPE ring gives its outside and inside measurements, so compare them with the ring in your watch. The angled SKX007 rings give none.

      Frequently Asked Questions

      What is a chapter ring on a watch?

      It's the outermost ring of the dial, the part that carries the minute track, hour markers or other scale the hands are read against. Fitting a new one changes how the watch reads while the dial itself stays.

      What size is an SKX007 chapter ring?

      Our SKX007 and SRPD chapter rings measure 30.5mm outside and 27.7mm inside, apart from the angled rings, which give no measurement. Most also list the Seiko SKX009 and SKX011.

      What's the difference between the standard and slim SKX013 chapter rings?

      Both measure 28.4mm across the outside. The standard SKX013 ring is 24.4mm across the inside, and the slim ring 26.2mm.

      Will an SKX007 chapter ring fit an SKX013 or SRPE?

      No. Our SKX007 rings are 30.5mm across, our SKX013 rings 28.4mm and our SRPE rings 32.7mm, so each watch takes its own ring.

      Do I need a GMT chapter ring for an NH34 build?

      Only if you want the 24-hour scale on the ring itself, where the NH34's GMT hand reads it. Our GMT chapter rings come in SKX007 and SRPD sizes and in SRPE sizes.

      Are there lumed chapter rings?

      Yes. The SKX007 and SRPD range has black and silver rings with C3 or BGW9 lume and an engraved GMT ring with C3 lume, and there's an engraved SSK ring with C3 lume.